logo_singer
singer global  |  where to buy  |  blog   |  login   |  signup   |  cart cart

Click here to review products

Koala and Paw Print Boy's Track Suit

Description

Our 2 coordinating designs can be reproduced on a Quantum XL-150, XL-1000, XL-5000 or XL-6000 using your PSW software. They can also be reproduced on the Futura machines. Use your favorite colors of Robison-Anton thread to sew out these two patterns.

Koala:

  • 2489 – Wicker
  • 2227 – Chocolate
  • 2575 – Dark Taupe
  • 2337 – Espresso
  • 2582 – Bone
  • 2296 – Black
  • 2342 – Natural White



Paw Print:

  • 2296 – Black

Click for paw print downloads

Materials Needed

Boy’s Track Suit

Materials Needed:

  • Pattern for boys’ track suit in the desired size
  • Fabric and notions as required by the pattern
  • 1 yard light weight cut away stabilizer
  • Spray adhesive
  • Koala embroidery design
  • Paw Prints embroidery design
  • 40 wt. rayon embroidery threads as required for embroidery
  • Chalk marker

Instructions

  1. Cut out pattern according to directions.
  2. On the shirt front piece, use chalk marker to mark vertical center.
  3. Print or stitch the design for use as a template, and trim to use for placement.
  4. After determining placement, place a crosswise chalk mark to denote design center.
  5. Hoop the stabilizer and spray with spray adhesive.



Directions for Futura users:

  1. Turn on the Futura machine.
  2. Place large hoop with the stabilizer onto the machine.
  3. Open Futura software. In the TEXT portion of the software, type a small period in the text box and apply stitches. Center the pattern by using the center function of the software.
  4. Open a new screen and open the koala bear design. Center the design by using the center function in the software.
  5. Transmit the first pattern (the period) to the Futura machine. Using the period to find the center of the hoop, place the fabric on top of the adhesive stabilizer and insert the needle in the center of the x-y line. When the fabric is in the desired position, press firmly into place smoothing from the center out. This will assure that the design will sew in the proper position. Cancel transmission.
  6. Now transmit the koala bear to the machine. Stitch.
  7. Repeat steps 2 through 6 for each set of paw prints. Depending on garment size, place 3 sets of paw prints up the pants leg, and one set near the bottom of the shirt front, below the koala bear.



Directions for QUANTUM XL-15O, XL1000, XL-5000 and XL-6000 users:

  1. Turn on machine and place large hoop with adhesive stabilizer on machine.
  2. Using the built-in lettering, enter a small (7mm) period. Use the editing tools to center the period.
  3. Open the koala bear. Use the editing tools to center the design.
  4. On the sew screen start sewing out the period without thread in the machine needle. Machine will move to center of the hoop and only sew a few stitches before it stops. Clear the error message. Place the fabric on top of the adhesive stabilizer. Insert the needle in the center of the X-Y lines. This will ensure that the design will stitch in the center of the square. When the square is correctly placed, press the fabric onto the stabilizer, smoothing from the center out. Cancel embroidery. Using the eyeglasses, move to the koala bear pattern.
  5. Thread machine and stitch out the design.
  6. Repeat steps 2 through 6 for each set of paw prints. Depending on garment size, place 3 sets of paw prints up the pants leg, and one set near the bottom of the shirt front, below the koala bear.



Construction:

Trim excess stabilizer

Compatible Machines

  • CE-350 Futura™
  • CE-250 | FUTURA™
  • XL-6000 QUANTUM®
  • CE-150 | FUTURA™
  • XL-5000 QUANTUM®
  • CE-100 Futura™
  • XL-150 | Quantum®