Posted June 9, 2015, 6:00 am
June is traditionally thought of as kick-off to the bridal season, so we thought we’d inspire you by showing a wedding dress that we embellished with machine embroidery! Whether you are making a wedding dress, any other special occasion dress, or if you just want to embellish one that has already made, machine embroidery allows you to create something that is truly one-of-a-kind!
Our dress is a ball gown silhouette, made with ivory silk satin. When you take a closer look at the embroidery that goes all the way around the dress, you’ll notice that there are larger embroidered areas that alternate with smaller ones. We used a technique called Multiple Hoop Embroidery to create the design layouts, which is a feature that can be found on many SINGER sewing & embroidery machines. This feature allows you to take a design that is the size of a single hooping, and create a larger design layout in the software. This large layout is then transferred to the machine for embroidery, but stitched “one hoop at a time”.
Take a closer look and you’ll see the four “repeats” of a single design.
A smaller, coordinating design was used to embroider the smaller sections between the larger embroidery layouts:
The thread color we chose for the embroidery was similar to the fabric color, creating a tone-on-tone effect. We used rayon thread on the top of the machine, for a beautiful sheen. Bobbinfil thread was used in the bobbin. Bobbinfil thread is finer (thinner) than all-purpose thread, so when you put it in the bobbin, you can get more thread on the bobbin each time you wind – so you wind less frequently. It also helps make the embroidery less dense on the backside of the fabric. We used SINGER Chromium needles, Style 2000, in a size 11 for doing the machine embroidery. Stabilizer is also important. A fusible tear-away, plus an additional layer of non-fusible tear-away stabilizer was used. When the embroidery was finished, we gently removed the excess stabilizer to prevent distorting the design.
Finally, we used heat-set Swarovski crystals (2000 of them!) to finish it off. We mixed 2 different colors of crystals – clear and pearl.
We hope that we’ve inspired you to add machine embroidery to one of your next projects! Please share with us what you’ve made – we’d love to see it!